CyLog Raster Fonts for Linux

-

Some of you may be familiar with the bitmap (raster) fonts that I have created a few years back or the Raster Font Editor software that I've written for MS Windows. I've been using Linux quite a lot recently so I decided at some point to convert them to BDF (Binary distribution format) files. Here's a quick guide on how to download them and install them:

Download Fonts

You can either download from here or type this from a terminal window:

wget http://www.cylog.org/files/fonts/cylog_fonts_bdf.zip

Unzip and Copy fonts

In a terminal window type the following:

unzip cylog_fonts_bdf.zip
mkdir ~/.fonts
mv *.bdf ~/.fonts
cd ~/.fonts
ls

...and ensure you can see the *.bdf files listed.

Convert the BDF files to PCF

To do the conversion we use the command line utility bdftocpf, and then we remove the BDF files:

bdftopcf -o leros10.pcf leros10.bdf
bdftopcf -o leros.pcf leros.bdf
bdftopcf -o lini.pcf lini.bdf
bdftopcf -o yamahana.pcf yamahana.bdf
bdftopcf -o yamaha.pcf yamaha.bdf
rm *.bdf
ls -l

Enable the use of Bitmap Fonts

Ubuntu (and Mint) has "kindly" locked the use of fixed fonts in your terminal, so unlock the feature by doing the following:

cd /etc/fonts/conf.d/
sudo rm 70-no-bitmaps.conf

To regenerate the font cache, use: (Note that this is not always required, fonts should already be available to use in your terminals)

sudo dpkg-reconfigure fontconfig

Use the fonts and rejoice!

Open your Terminal's Profile Preferences and use my fonts!:

  • Leros, my original font I created when I got my first 1024x768 LCD laptop
  • LerosC10, a slightly compressed in height version of Leros
  • Lini, a tiny font suitable for log windows
  • Yamaha Narrow
  • YamahaC, (experimental/beta)

Enjoy!

Comments

andreadi said…
Yamaha Narrow, I remember that. Getting now.
12:49 PM, April 18, 2013
frankoid said…
I'm glad to see that Leros lives on!
8:03 PM, April 19, 2013
Post a Comment

Popular posts from this blog

Switching iPhone visibility in Windows 10

-
Image
It's been now several times that I plugged in my iPhone to download my pictures into Lightroom and the device is not showing up on "My Computer". When launching iTunes the iPhone is there, fully operational, sync-able, etc. I've got the latest iTunes, the latest update on the phone, everything! What's going on? The iPhone simply seems to either operate as an MTP USB Device which makes it visible under "My Computer" or as an Apple Mobile Device which makes it visible in iTunes. Switching between the two modes is simple: iPhone working in iTunes, not visible in "My Computer" Device Manager -> Portable Devices -> right-click on Apple iPhone -> Update Driver Software... -> Browse my computer for driver software ->  Let me pick from a list of device drivers on my computer -> MTP USB Device -> click Next. iPhone visible in "My Computer", not visible in iTunes Device Manager -> Universal Serial Bus control...
Read more

Installation of Mint 17.1 Cinnamon on VMWare

-
It's been 2.5 years since I posted an installation guide of installing Ubuntu 12.10 on VMWare Workstation but the release of Linux Mint 17.1 has prompted me to write an updated guide. This is the third of my guides, acting mostly as a memo for a quick install of new distros on VMWare, my first one written in 2009 ( Linux on VMWare with later additions of other posts full of little hints and reminders (e.g. fonts, keymaps)). Ingredients Please note that these instructions work for most distros, although this post focuses on Mint 17.1 A downloaded ISO image of your favourite distro ( Mint , Mint LMDE , Ubuntu , Debian ) A newly created virtual machine with 2-8GB of RAM, a 40-60GB disk and a couple of CPU cores. Installation Mount the ISO image to your VM's optical drive and boot it up, then follow the instructions to install your distro selecting your preferences (timezone, keyboard layout, etc.). For accessing your VM via ssh from your host, it helps if your Lin...
Read more

GetDIBits vs. Scanline vs. Pixels[] in Delphi Bitmaps

-
I've been always wanting to sit down one day and solve this problem; test the speed of manipulating pixels on a Bitmap using the three options: - the convenient but understandably slow Pixels[], - the "interesting" Scanline property and - the Windows API GetDIBits and SetDIBits. I have been traditionally using Pixels for quick work and the Get/SetDIBits for low-level pixel manipulation such as the filters used in ToolBox . Never really used the Scanline property in anger, I was always thinking, DIBits "had" to be quicker. Little I knew... I have been experimenting with two tools that I've written and never released to the public domain. The first is the BMPCreator which I wrote in order to create 256-level grayscale bitmaps, the other is the IconCreator which uses a grayscale bitmap and applies color maps to it, giving you the ability to create different colored versions of the same icon (like in my database visualization tool VirtualTreeNavigator ). Yesterd...
Read more